Location: Home > Inspection > Inspection Standard
Inspection on clothing

There are many kinds of clothing, in different form of clothing, function, usage, production methods, raw materials, as every kind of clothing is showing different styles and characteristics. Different clothing also have different inspection procedures and inspection methods.

 

The Importance of Clothing Inspection Procedures

 

However the importance of inspection compared with quality prevention, is second choice but still an important and effective means of control, although it can be said to be behind a beat and an after-the-fact check. If prevention is seen as a quality defect that can not occur, then the positive side of the test is that it will not happen again. Therefore, in strengthening quality prevention at the same time, still need to strengthen quality inspection.  

 

The inspection steps of any kind clothing should be managed in advance of starting, so that to make sure each part of the clothing is within the scope of visual sight, completely put an end to the phenomenon of quality leakage.

 

Principle Setups 

 

The standards on the quality of clothing appearance includes 8 objects: raw materials, longitude and latitude yarn direction, color shading, appearance defects, sewing, size grade, specifications deviation and ironing. According to these characteristics, the appearance visual check should be: from top to bottom, from left to right, from front to back, from the surface to the inside.

 

Example: Bath robe inspection

 

Bath robe inspection steps flowing: 1. Trademark 2. Collar 3. Shoulder 4. Eyelet 5. Button 6. Front placket 7. Pocket 8. Sleeve bottom slit 9. Cuff 10. Measure length 11. Measure sleeve length 12. Measure chest circumference 13. Measure shoulder width 14. Measure collar 15. Measure needle range 16 inner seam slit 17. In-lining 18. Defect 19. Color shading 20. Ironing 21. Hem.

 

Example: Pants inspection

 

Flowing of inspection steps: 1. Trademark 2. Belt loops 3. Dart around waist 4. Waist 5. Pocket 6. Crutch seam front and back 7. Seam of cross crutch 8. Foot 9. Side seam 10. Measure waist circumference 11. Measure needle density 12. Interlining 13. Defects 14. Color shading 15. Ironing 16. Measure length 17. Heel stay

 

Through above steps of inspection procedures, can make each part of the product within the scope of visual control, fundamentally put an end to the phenomenon of quality leakage.